Skip to content

Vortex Golden Eagle HD 15-60×52 instruction manual

Product: https://www.optics-trade.eu/en/vortex-golden-eagle-hd-15-60×52.html

This text is a transcription of the file in PDF format.

Specifically designed for the competitive, long-range shooters the
Golden Eagle™ riflescope offers the highest levels of performance
and reliability. With features such as side focus, generous long
eye relief, and ruggedly constructed single-piece main tubes, this
scope is ready for your next match.

Golden Eagle® Unique Accessories List

The Golden Eagle 15-60×52 riflescope includes the following
unique accessories.

3” Sunshade

Objective thread in, use this accessory to block sunlight on
objective lens and reduce image glare as necessary.

Aluminum Lens Caps

Objective/Ocular thread in, use these tough caps to protect lenses
when riflescope is not in use.

Aperture Stop Ring (ASR)

The ASR threads into the objective end and effectively reduces
the aperture and increases the depth of field. This will allow you
to more easily observe down range mirage and wind indicators
while still keeping your target in focus. The ASR may be
combined with sunshade and fits in either before or after to your
preference.

10 MOA Windage Turret

This windage turret to allows dialing up to 10 MOA while not
getting lost on the adjustment (the standard turret will allow up
to 5 MOA). To install turret, loosen three set screws on standard
windage turret and remove. Install and index 10 MOA turret and
re-tighten set screws.

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

RETICLE OPTIONS

The Focal Plane

All riflescope reticles can be termed either first focal plane (FFP)
or second focal plane (SFP), depending upon their internal
location within the riflescope. This model features the second
focal plane design.

Second Focal Plane Reticles

Second focal plane (SFP) reticles are located near the scope’s
eyepiece behind the image erecting and magnifying lenses. This
style of reticle does not visually change in size when you change
the magnification. The advantage of an SFP reticle is that it
always maintains the same ideal visual appearance. Listed reticle
subtensions used for estimating range, holdover, and wind drift
correction are only correct with the magnification set at 40X
magnification.

RIFLESCOPE ADJUSTMENTS

Reticle Focus

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

The Golden Eagle riflescope uses a fast focus eyepiece designed to
quickly and easily adjust the focus on the riflescope’s reticle.

To adjust the reticle focus:

• Look through the riflescope at a
blank white wall or up at the sky.

• Turn the eyepiece focus knob in or
out until the reticle image is as crisp
as possible.

Note: Try to make this particular
adjustment quickly, as the eye will
try to compensate for an out-of-focus
reticle.

Once this adjustment is complete, it will not be necessary to
re-focus every time you use the riflescope. However, because
your eyesight may change over time, you should re-check this
adjustment periodically.

Warning
Looking directly at the sun through a riflescope, or any optical
instrument, can cause severe and permanent damage to your
eyesight.

Windage and Elevation Adjustments

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

This riflescope features adjustments and reticles scaled in minute of
angle (MOA). This unit of arc scale is used when raging or adjusting
a riflescope for bullet trajectory. The Golden Eagle comes with an
optional 10 MOA windage turret for dialing a full 10 MOA revolution
before the scale repeats.

MOA Adjustments

MOA unit of arc measurements are based
on degrees and minutes. A minute of angle
will subtend 1.05 inches at a distance of
100 yards (29.1 mm at 100 meters). This
riflescope uses 1/8 minute clicks which
subtend .13 inches at 100 yards (3.6 mm
at a 100 meters), .26 inches at 200 yards
(7.2 mm at 200 meters), .39 inches at 300
yards (10.8 at 300 meters), etc.

To make adjustments:

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

1. Turn the turret in the appropriate
direction: Up/Down or Left/Right as
indicated by the arrows.

2. Turn the dials in the direction you
wish the bullet’s point-of-impact to
go to.

3. Turn the required amount of MOA’s
to achieve the desired change in the
bullet point of impact.

4. After sight-in, realign the zero
marks on the turret dials with the
reference lines on the scope body.

Using the Side Focus

Golden Eagle riflescope uses a side focus adjustment which provides
maximum image sharpness and eliminates parallax error.

Setting the side focus:

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

1. Be sure the reticle is correctly focused (see
Reticle Focus on page 5).
2. Turn the side focus knob until the target
image is as sharp as possible.
3. Check for parallax error by moving
your head back and forth while
looking through the scope. The focus
is correct if there is no apparent shift
of the reticle on the target. If you
notice any shift, adjust the focus knob
slightly until all shift is eliminated.

Parallax is a phenomenon that results when the target image
does not quite fall on the same optical plane as the reticle
within the scope. When the shooter’s eye is not precisely
centered in the eyepiece, there can be apparent movement of
the target in relation to the reticle, which can cause a small
shift in the point of aim. Parallax error is most problematic for
precision shooters using high magnification.

RIFLESCOPE MOUNTING

To get the best performance from your Golden Eagle riflescope,
proper mounting is essential. Although not difficult, the correct
steps must be followed. If you are unsure of your abilities, it would
be best to use the services of a qualified gunsmith.

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

Rings and Bases

Mount an appropriate base and matching rings to your rifle
according to the manufacturer’s instructions. Golden Eagle
riflescope requires 30mm rings.

Use the lowest ring height that will provide complete clearance of
scope and rifle—avoiding any contact with barrel, receiver, bolt
handle or any other part of the rifle. A low mounting height will
help assure proper cheek weld, aid in establishing a solid shooting
position, and promote fast target acquisition.

Eye Relief and Reticle Alignment

After installing the bottom ring halves on the mounting base, place
the riflescope on the bottom ring halves and loosely install the upper
ring halves. Before tightening the scope ring screws, adjust for
maximum eye relief to avoid injury from recoil:

1. Set the riflescope to the middle of its magnification range.

2. Slide the riflescope as far forward as possible in the rings.

3. While viewing through the riflescope in a normal shooting
position, slowly slide the riflescope back towards your face. Pay
attention to the field of view. Stop sliding the riflescope back as
soon as you see the full field of view.

4. Without disturbing the front-back placement, rotate the
riflescope until the vertical crosshair exactly matches the
vertical axis of the rifle. Use of a reticle leveling tool, a weight
hung on a rope, flat feeler gauges, or a bubble level will help
with this procedure.

After aligning the reticle, tighten and torque the ring screws down
per the manufacturer’s instructions.

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

Bore Sighting

Initial bore sighting of the riflescope will save time and money at
the range. This can be done in a number of ways. A mechanical
or laser bore sighter can be used according to the manufacturer’s
instructions. On some rifles, bore sighting can be done by removing
the bolt and sighting through the barrel.

To visually bore sight a rifle:

• Place the rifle solidly on a rest and remove the bolt.

• Sight through the bore at a target approximately 100 yards away.

• Move the rifle and rest until the target is visually centered inside
the barrel.

• With the target centered in the bore, make windage and elevation
adjustments until the reticle crosshair is also centered over the
target.

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

Final Range Sight-In

After the riflescope has been bore-sighted, final sight-in should
be done at the range using the exact ammunition expected to
be used while shooting. Sight in and zero the riflescope at the
preferred distance. 100 yards is the most common zero distance,
although a 200 yard zero may be preferred for long range
applications.

Note: Be sure the reticle is in focus (see Reticle Focus on page
5) and set the side focus adjustment (if present) to match the
distance being used for sight-in:

• Following all safe shooting practices, fire a three-shot group as
precisely as possible.

• Next, adjust the reticle to match the approximate center of the
shot group (see Windage and Elevation Adjustment on page 6).

Note: If the rifle is very solidly mounted and cannot be moved,
simply look through the scope and adjust the reticle until it is
centered on the fired group.

• Carefully fire another three-shot group and see if the bullet
group is centered on the bullseye.

This procedure can be repeated as many times as necessary to
achieve a perfect zero.

Indexing Adjustment Dials with Zero Reset

Golden Eagle rifl escopes feature windage/elevation dials that allow
you to re-index the zero indicator after sight-in without disturbing
your settings. Though not required to do, this process will allow you
to quickly return to your original zero if temporary corrections are
dialed in the fi eld. Reset the windage and elevation dials in this
way:

Vortex Golden Eagle HD 15-60x52
Vortex Golden Eagle HD 15-60×52

MAINTENANCE

Cleaning

The fully waterproof and fogproof Golden Eagle rifl escope requires
very little routine maintenance other than periodically cleaning
the exterior lenses. The exterior of the scope may be cleaned by
wiping with a soft, dry cloth.

When cleaning the lenses, be sure to use products, such as
the Vortex Fog Free cleaning products or LensPen, that are
specifi cally designed for use on coated optical lenses.

• Be sure to blow away any dust or grit on the lenses prior to wiping
the surfaces.
• Using your breath, or a very small amount of water or pure
alcohol, can help remove stubborn things like dried water spots.

Lubrication

All components of the Golden Eagle rifl escope are permanently
lubricated, so no additional lubricant should be applied.

Note: Other than removing the turret caps, do not attempt to
disassemble any components of the rifl escope. Disassembling of
rifl escope may void warranty.

Storage

If possible, avoid exposing your Vortex rifl escope to direct sunlight or
any very hot location for long periods of time.

TROUBLESHOOTING

Sighting-in Problems

Many times, problems thought to be with the scope are actually
mount problems. Be sure that correct base and rings are being
used in the correct orientation, and that the base screws and rings
are tight. Insufficient windage or elevation adjustment range may
indicate problems with rings, base, base alignment, base mount
holes drilled in the rifle’s receiver, or barrel/receiver alignment.

Check for Correct Base and Ring Alignment

• Roughly center the reticle by adjusting both windage and
elevation turrets to the mid point of their travel ranges.

• Attach bore sighter, or remove bolt and visually boresight rifle.

• Look through the scope. If the reticle appears way off center on
the boresighter image or when compared to the visually centered
target when looking through rifle’s bore, there may be a problem with
the bases or rings being used. Confirm that correct base and rings
are being used—and in the proper orientation.

Tips for Solving Bullet Grouping Problems

• Maintain a good shooting technique and use a solid rest.

• Check that all screws on rifle’s action are properly tightened.

• Be sure rifle barrel and action are clean and free of excessive oil or
copper fouling.

• Check that rings are correctly torqued per the manufacturer’s
instructions.

• Some rifles and ammunition don’t work well together—try
different ammunition and see if accuracy improves.

THE VIP WARRANTY

We build optics based on our commitment to your absolute
satisfaction. That’s why Vortex products are unconditionally
guaranteed and we make this Very Important Promise to you—a Very
Important Person.
Rest assured that in the event your riflescope becomes damaged or
defective, Vortex Optics will repair or replace
the riflescope at no charge to you. Call
Vortex Optics at 800-426-0048 for prompt,
professional, and friendly service.

Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
[email protected]

The VIP Warranty does not cover loss, theft, deliberate damage
or cosmetic damage that does not hinder the performance of the
product.

SHARE THIS POST

YOU MIGHT ALSO LIKE

Leave a Reply

Your email address will not be published. Required fields are marked *